KH frames balance the competing requirements of strength, weight, and stiffness, refined through years of evolution and testing by trials, muni, distance World Champions and backcountry adventurers.

Made from 7005 aluminum, the one-piece forged fork crown and neck incorporates the best characteristics of both flat top and rounded designs, with a stable platform and rounded corners to avoid bashed knees. Different tube diameters and sidewall thicknesses are used in different parts of the frame to optimize strength-weight ratio.

The seatpost tube is closed at the bottom to prevent entry of mud. The fork blades are ovalized and stiff in both lateral and twisting directions - important for avoiding rim brake rub. The 24” and larger frames come with both Magura™ rim brake and Spirit disk brake compatible mounts.

Select frames are available in either KH Signature Blue OR raw finish


Common to All KH Frames
Manufactured using 7005 T6 Aluminium featuring a one-piece forged fork crown and neck providing high strength-weight ratio and resistance to flex.
The Signature Rounded Square Crown curves the fork blades inwards at the top to achieve the best qualities of both fully square and fully round crown frames. This results in a narrow profile that won't bash your knees while providing sufficient tire clearance and a stable platform for tricks.
All welds are individually inspected at the factory, and every frame is checked in a test jig for proper alignment following welding and heat treatment.
Forged machined bearing holders ensure consistent press-fit of the bearings and improved durability. The asymmetrical external shape is optimized for KH Spirit, KH Moment and KH/Schlumpf hubs, and kept as narrow as possible to ensure room for your feet during flatland tricks (e.g. crank rolls). Hex bolts tighten from the bottom for easy access.
The seatpost tube fits a 27.2 mm diameter post, ensuring good resistance to twisting.
KH20
Weight: 572g
Horizontal Crown Width: 93mm
Seatpost Neck Length: 150mm
KH20LN
Weight: 656g
Horizontal Crown Width: 93mm
Seatpost Neck Length: 300mm
KH24
Weight: 646g
Horizontal Crown Width: 93mm
Seatpost Neck Length: 125mm
Brake Mounts: International Standard (IS) disk calliper mounts (right side) & Magura™ compatible rim mounts.
KH26
Weight: 650g
Horizontal Crown Width: 100mm
Seatpost Neck Length: 125mm
Brake Mounts: International Standard (IS) disk calliper mounts (right side) & Magura™ compatible rim mounts.
KH29
Weight: 684g
Horizontal Crown Width: 100mm
Seatpost Neck Length: 125mm
Brake Mounts: International Standard (IS) disk calliper mounts (right side) & Magura™ compatible rim mounts.
KH36
Weight: 806g
Horizontal Crown Width: 93mm
Seatpost Neck Length: 110mm
Brake Mounts: International Standard (IS) disk calliper mounts (right side) & Magura™ compatible rim mounts.

Our Commitment

Kris Holm Unicycles prides itself on producing equipment that lasts through years of long rides with minimal maintenance or repairs. Should you have any concerns about the quality of your KHU product please refer to our Warranty Policy or contact us.

Resources

Spirit Cranks Disc Brake Instructions pdf (179 KB)

Installation instructions for External Disc Brake (EDB) systems on 2012+ KH unicycles

Notice d’installation des manivelles Spirit Disc pdf (183 KB)

Installation instructions for External Disc Brake (EDB) systems on 2012+ KH unicycles